Overview Of VSI Sand Making Machine↑

VSI Sand Making Machine is a newly researched equipment, with international advanced level. Technology and modern processing equipment make it a leading role in this industry.

The Application Of VSI Sand Making Machine↑

VSI Sand Making Machine is widely used for artificial sand, in metal and non-metal ores, cement, refractory material, highway building, aggregate, quartz, bauxite, silicon carbide, glass material, building material.

The Features & Benefit Of VSI Sand Making Machine↑

• Advanced double-pump oil lubrication system guarantee shaft bearing lower temperature increase, longer life time, more reliable operation.
• Main shaft is equipped with imported precision rolling bearing. It makes main shaft work stable, lengthen maintenance cycle, increases productivity.
• Hydraulic lifting mechanism of upper cover can move away the cover easily, which saves man power during maintenance.
• Over-vibration device is equipped. There will be alarm when vibration surpasses a stipulated figure. It will stop the machine, in order to protect it.
• Special dust-proof design for main shaft bearing fully avoid dust entering bearing lubrication part, which make sure the machine work normally.
• Special feed opening structure makes it possible that center feeding and ring feeding comes together, in order to meet requirement of different stones. In addition, this equipment can not only crush stone, but also iron.
• Shape of material-through device is better designed, which improve the utilization ratio.

Main Parts Of VSI Sand Making Machine↑

VSI Sand Making Machine is made up of First Stage Impact Curtain With Anvils, Impact Crutain Adjusting Rods, Second Stage Impact Curtain With Anvils, Rotor, Liner plate, Blow Bar, Wedge Lock Assembly, Discharge Opening, Third Stage Impact Plate, Back-up Bar and so on.

Working Principle Of VSI Sand Making Machine↑

Raw materials fall down into feed hopper, and then through ring, and is divided into two parts by material-dividing plate. One enters into impellor across the center of material-dividing plate,then is accelerated and thrown out. The other falls down from the outside of material-dividing plate. Material, which is thrown out by impellor at a speed of 60-75m/s, hits material that coming down from the outside of material-dividing plate. In this way, material is crushed in the vsi crusher.

Specification Of VSI Sand Making Machine↑

Model		B-VSI7611	B-VSI8518	B-VSI9526	B-VSI1140
Capacity(t/h)	Feed both at center and at sides	120-180	200-260	300-380	450-520
	Feed at center	60-90	100-130	150-190	225-260
Max feed size(mm)	Sofe material	<35	<40	<45	<50
	Hard material	<30	<35	<40	<45
Rotation speed(r/min)		1700-1890	1520-1690	1360-1510	1180-1310
Power(KW)		110-150	180-220	264-320	400-440
Overall dimension L*W*H (mm)		3700×2150×2100	4140×2280×2425	4560×2447×2778	5000×2700×3300
Weight(t)		7.8	10.3	16	25.6
Power supply		380V,50HZ	380V,50HZ	380V,50HZ	380V,50HZ
Vibrating sensor		detect range: 0.1-20mm/s continous and adjustable
Lubrication and hydraulic station	Power	2×0.31KW
	Safety assuance	Double oil pumps assure enough oil supply; automatic switch off with no oil stream or hydraulic strength; lower the temperature with cool water in summer; raise the temperature with motor in winter.
	Overall demension L*W*H(mm)		820×520 ×1270	820×520 ×1270
	Power of oil tank heater	2KW

Maintenance Of VSI Sand Making Machine↑

The routine maintenance is essential and necessary for vsi sand making machine regularly make vsi sand making machineget adequate downtime. observe the vsi sand making machine internal wear and tear. Once discover, timely repair or replace.in addition note that in the sand making course of its work, it is absolutely not open to observe, in order to avoid dangerous incidents. When vsi sand making machine work for 400 hours, add the right amount of grease. When work to 2000 hours, open the spindle to clean. If vsi sand making machine work to 7200 hours,the bearings must be replaced with a new one. Tape tension power transmission triangle size should be adjusted appropriately to ensure that tapes should be grouped triangle matching, then the length of each group as uniform as possible. It should be adjusted to the difference of two motor current no more than 15A. In the course of their work, should pay special attention to safety, because vsi sand making machine equipment belongs to high- speed operation. Staff stay away from the device. If need to repair, they must operate only after power outages.

Get Price About VSI Sand Making Machine↑

---

Full Name:	*
Email:	*
Telephone:	*
More:

---

Note: These data is just reference, any change is subject to the VSI Sand Making Machine product.