Overview Of SCM Series Super Thin Mill ↑

On the basis of more than 15 years’ production experience of our company, we absorb grinding mill technology advantages from the same field abroad and domestic, organizing elite powder processing experts to investigate, research, try again and again; finally, we develop this high-efficiency and low-cost SCM Series Super Thin Grinding Mill.

The Application Of SCM Series Super Thin Mill ↑

SBM super thine mill mill is widely used in making fine powder or micro powder, a new kind of machine for producing ultrafine powder. It is mainly used for grinding the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, trona, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, beads, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.

The Features & Benefit Of SCM Series Super Thin Mill ↑

• High capacity and low consumption;
• Easy fineness adjustment and high fineness;
• Reliable Security;
• Clean, environmental protection.

Main Parts Of SCM Series Super Thin Mill ↑

The whole system of the super thin grinding mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.

Working Principle Of SCM Series Super Thin Mill ↑

The main motor of the Super Thin Grinding Mill (Ultrafine Mill) drives main axle and every layer rotating by the power of reducer. Dial drives numbers of rollers rolling and rotating in the ring by pintles. Big materials are crushed into small particles by hammer crusher. Then they are sent to store house by elevator. Vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials fall into the ring to be pressed, crushed and Milled into pieces by rollers. After the first crush, materials fall into the second and third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.

Specification Of SCM Series Super Thin Mill ↑

Model	SCM6015	SCM8021	SCM10027
Number of Roller(pcs)	15	21	27
Diameter of Roller(mm)	Φ600	Φ800	Φ1000
Number of Ring(pcs)	1	1	1
Rev. of Main Fram(r/min)	235	235	173
Max. Feed Size(mm)	<=10	<=10	<=20
Finished Size(mesh)	325-2500	325-2500	325-2500
Capacity(kg/h)	325-2500	600-4000	900-6000
Overall Dimension(m)	10×2.3×5.5	13×3×5.8	18×4×8.6

Maintenance Of SCM Series Super Thin Mill ↑

1. System of job responsibility and operation standard should be build for someone who responsible for equipment operation. Operator must be qualified with machine technical feature, operational requirement and operating rules and regulations. New operator must receive technical training and meet the requirement of operation.
2. In order to ensure Mill can work normally for a long term, it is necessary to establish the equipment maintenance system and have examination and repair tool, accessories, spare parts and grease.
3. After a period, you should carry on the overhaul and exchange rollers and rings so that it can work normally.
4. It is benefit to lubricate each oil site according to lubrication system requirement.
5. It is normal phenomenon that ring crackle appear because it is worn to a certain thick, you should exchange it in time.
6. In order to guarantee blower can work stable, you should sweep and clear the ash on its leaves regularly.
7. In order to avoid resistance oversized, affects the wind amount, you should clean the muffler timely.
8. Exanimate bag filter regularly and exchange it if it is worn.
9. Maintenance of corollary equipment should refer to its instruction.

Get Price About SCM Series Super Thin Mill ↑

---

Full Name:	*
Email:	*
Telephone:	*
More:

---

Note: These data is just reference, any change is subject to the SCM Series Super Thin Mill product.