Overview Of High Pressure Mill↑

The High Pressure Mill is a new kind of Mill, which is invented by shibang company chief engineer Mr Bai yinghui, who has been engaged in the suspension Mill’s research and development for many years. This new patent product——the High Pressure Mill , with high efficiency and low energy consumption has opened up an epoch of the international pulverizing industry.

The Application Of High Pressure Mill↑

High Pressure Suspension Grinding Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, and mining etc. The Grinding Mill can produce powder from more than 280 kinds of non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as barite, limestone, calcite, granite, porcelain clay, basalt, gypsum etc.

The Features & Benefit Of High Pressure Mill↑

• Compared with the common Raymond grinding Mill under the same power conditions, the capacity of the High Pressure Mill can be increased by 10%; moreover, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 800-1200kgf.
• The final product size of the High Pressure Millranges from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.033mm (425 mesh). A few materials can reach 0.013mm (1000 mesh) if you choose the High Pressure Mill.
• All the mineral materials with Mohs hardness below 9.3 can be crushed by the High Pressure Mill.
• The High Pressure Mill adopts a superposition multi-grade sealing with good sealing performance.
• The High Pressure Mill’s dust-removing effect fully meets the national dust discharge standard.
• The classifier is easy for adjustment.

Main Parts Of High Pressure Mill↑

High Pressure Grinding Mill is made up of milling part including roller and ring, feeding part, discharging part including classifier,collector and cloth deduster transmission part and so on.

Working Principle Of High Pressure Mill↑

When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.

Specification Of High Pressure Mill↑

Model		YGM7815	YGM8314	YGM9517	YGM4121
Roller	Number(pcs)	3	3	4	5
	Diameter(mm)	260	270	310	410
	Height(mm)	150	140	170	210
Ring	Inner Diameter(mm)	780	830	950	1280
	Height(mm)	150	140	170	210
Max. Feed Size(mm)		15	20	25	30
Finished Size(mm)		1.6-0.045	1.6-0.045	1.6-0.045	1.6-0.045
Power(kw)		18.5	22	37	75

Maintenance Of High Pressure Mill↑

No information

Get Price About High Pressure Mill↑

---

Full Name:	*
Email:	*
Telephone:	*
More:

---

Note: These data is just reference, any change is subject to the High Pressure Mill product.